Coil and Blower Cleaning in Texas

Licensed & insured Every company we put you through to holds current licensing and insurance.
Know what to ask You are told what actually decides the price, so you can judge a quote.
Someone local You are put through to a technician who works your area, not a call center three states away.
Calls answered 7 days Someone picks up seven days a week, weekends included.

Is it urgent?

This week

Not an emergency, but worth doing sooner than a duct cleaning if you are choosing between them. A caked blower wheel loses airflow to the whole house and makes the system work harder for the same result, and a dirty coil does the same to capacity.

Two things override everything on this page. If anyone has symptoms of carbon monoxide exposure — headache, nausea or dizziness that improves outdoors — leave the building and call the gas utility or the fire service, not a duct company. And if you can smell burning while the dryer is running, unplug it and leave it.

Signs to look for

Weak airflow from every register rather than from one or two
A smell that appears within seconds of the system starting and then fades
The system running longer than it used to for the same comfort
Visible gray felting on the coil fins when you look at the air handler
Water where it should not be, because a blocked coil can push condensate out of the pan

How the work is done

Opening the air handler and inspecting the coil, the blower wheel and the drain pan before quoting
Cleaning the coil with the appropriate method for how badly it is loaded, which may mean pulling the coil rather than spraying it in place
Pulling and cleaning the blower wheel, which is the part most often skipped and most often the actual problem
Clearing the condensate drain and pan while the unit is open, since it is the cheapest moment to do it

In Texas specifically

In Texas the ductwork is generally in vented attics above slab-on-grade homes, where summer attic temperatures routinely pass 140 degrees, which is most of why this job looks the way it does here. Texas attics get brutally hot, and that is where almost all the ductwork is. Flexible duct insulation degrades, tape lets go, and joints separate — so a Texas duct problem is usually a heat-damage problem rather than a dirt problem, and cleaning alone does not fix it. The same heat makes leakage expensive: air lost from a duct in a 140-degree attic is air the system has to make up, and it is the quiet reason a Texas cooling bill can be high on a system that tests fine otherwise.

Before the technician arrives

Four things worth doing — and the first one is usually the thing people get wrong.

Turn the system off at the thermostat an hour before, so the coil is not wet and cold when someone opens it up.
Clear access to the air handler. In an attic or a closet that usually means moving stored items.
Do not spray a supermarket coil cleaner into the unit first. The wrong chemistry damages aluminum fins, and the residue makes the real clean harder.
Say whether the smell is at startup or continuous — they point at different parts of the system.

What the work looks like

Photographs of coil and blower cleaning being carried out, so you know what to expect on the day.

How it works

Three steps, and you decide at the end of them.

1
You call and describe the problem

Tell us what you have noticed and where — the room, the smell, the noise, how long it has been going on. Give us your ZIP code and we will match you to a licensed company covering your area. There is no form to fill in.
2
A local company takes it from there

They discuss the problem with you directly, arrange a time to inspect, and agree the work and the price with you before anything starts. That conversation is between you and them.
3
You decide whether to go ahead

You are under no obligation. If the quote or the approach is not what you wanted, you are free to say no and call someone else.

Coil and Blower Cleaning — FAQs

Do I actually need Coil and Blower Cleaning done?

Not an emergency, but worth doing sooner than a duct cleaning if you are choosing between them. A caked blower wheel loses airflow to the whole house and makes the system work harder for the same result, and a dirty coil does the same to capacity.

What does Coil and Blower Cleaning involve?

The evaporator coil and the blower wheel sit at the start of the airflow and collect the finest material. They are also, far more often than the ducts, where a smell or a drop in airflow actually comes from.

What makes this different in Texas?

In Texas the ductwork is generally in vented attics above slab-on-grade homes, where summer attic temperatures routinely pass 140 degrees, which is most of why this job looks the way it does here. Texas attics get brutally hot, and that is where almost all the ductwork is. Flexible duct insulation degrades, tape lets go, and joints separate — so a Texas duct problem is usually a heat-damage problem rather than a dirt problem, and cleaning alone does not fix it. The same heat makes leakage expensive: air lost from a duct in a 140-degree attic is air the system has to make up, and it is the quiet reason a Texas cooling bill can be high on a system that tests fine otherwise.

Are the companies licensed and insured?

Yes. We only pass calls to licensed, insured operators working in Texas, and you are welcome to ask to see a license number on arrival.

What does Coil and Blower Cleaning cost?

It depends on the property, the size of the system and what the inspection finds, so we do not publish a price — a figure quoted on a web page is not one the attending company has agreed to. You get a price before any work starts.

Coil and Blower Cleaning near you

All Texas towns →

Coil and Blower Cleaning in Texas

Call about Coil and Blower Cleaning

What happens when you call

Worth having to hand